Yuketen Rob's Loafer w/Leather Sole Tosca G Brown

Regular price
£595.00
By Yuketen

Size
Footwear Size Guide

 

 

 

 

We carry quite a broad range of high-end footwear options here at Clutch Cafe, and each pair is going to size differently to the next. Therefore, we’ve put together a guide to help you understand some of the sizing and fit details for the brands and styles we offer so you can make a more informed decision about what is going to work best for you.

 We’ll be using US Brannock device sizing as a reference point for this, but if you don’t know your size then find the comfiest pair of trainers you own and use the US shoe size stamped on them as the next best thing. If you own or have tried any made in USA New Balance models, those are essentially Brannock size when sized correctly. Most of our footwear brands are available in US sizing which is why we’re going American here - makes it easier to translate to what we have available.

 

Alden

 

 Aberdeen Last

True to Brannock size.

The Aberdeen last is one of Alden's most true to Brannock size lasts. It tapers from the ball of the foot to the end of the toe for a sleek silhouette. Whilst a shoe on the Aberdeen last runs a touch long, it's not recommended to size down as the extra length accounts for that pointier toe shape - sizing down often results in pinched toes and an uncomfortable fit. The Aberdeen has a slightly high instep and may not work well for those with low volume feet, especially with the aforementioned issues with sizing down.

 

Barrie Last

Brannock size / Half a size down.

The Barrie last features a higher instep and softly tapered toe shape. It’s a very nice balance between smart and casual and is often used for the plain toe blucher style. This last is a roomy one and works well when worn half a size down for many people, although if you have a higher volume foot and/or a high instep, you might find your actual size the most comfortable.

 

Leydon Last

True to Brannock size.

A streamlined silhouette that falls somewhere between the Aberdeen and the Barrie last. Go true to Brannock size in shoes and boots built on this one for a comfortable fit.

 

Van Last

Brannock size / half down for loafers.

Used for most penny loafer styles as well as our Ranger Mocs. It features a roomy heel, low instep and slightly short toe box. This does sounds like it works against the shape of most people’s feet, but it works very nicely when sized correctly. Very comfortable worn true to size for styles with an adjustable fit (i.e. laces!) but often better at half a size down for loafer styles. A few people will get away with true to size in Van last loafers, as the low instep compensates for the roomier heel. In general, most people take the same size as they would in the Barrie.

 

Trubalance Last

Half down / whole size down.

The largest fitting last, used for the Indy boot primarily. At least half a size down for pretty much everyone, with some people going down a full size. A close fit in the heel and arch but a nice wide open, almost square fit around the toe. The intended fit should leave plenty of space between your toes and the tip of the boot. This allows for going a full size down if you have a low instep and lower volume foot, but when in doubt stick with half a size down.     

 

Clinch

 

 Clinch’s specially designed lasts are part of what makes their boots and shoes so coveted. A common feature across the board is a low instep and a slim fit. This is balanced by a round toe silhouette for most of their styles, offering a comfortable amount of room in the forefoot.

 

CN Last

Brannock size / Half down.

The brand’s standard ‘Classic narrow’ last, used for styles such as the engineer boot and jodhpur boot. Regular D width feet can stick with true to size, whilst those of you on the narrower side will get away with half a size down. Unfortunately these aren’t very wide foot friendly, but if you’re an E width then you may get away with half a size up. You’d be better off with the CN Wide last however, which leads into:

 

 CN Wide Last

 Half down / Brannock size if E width.

 A wider version of the CN last. Regular D width feet will be comfortable half a size down, whereas wider E width feet can go true to size. Not recommended for narrow feet.

 

HR Last

 Brannock size / half down.

 Used for our Cowboy boot style. It features a pointier toe, in order to fall more in line with the styling of a traditional cowboy boot. It’s subtle and doesn’t affect the fit too noticeably for most - follow the same sizing advice as the CN last.

 Clinch can be harder to size than our other brands, particularly if you’re trying to figure it out online rather than in-store. Please get in touch with us if you need further help.

 

 Danner

 650 EE Last 

 Half a size down.

 Both the Light and the Mountain Light are built around the same 650 EE Last, and in this case EE is much more similar to a regular D width. They should be comfortable form the first wear - do not size these with the intention of having them stretch and mould to your foot. You want to be feeling more of a ‘sneaker’ fit with these when you try them on. They’re designed for hiking after all, and need to feel non-restrictive enough to do so. Keep this in mind when trying them on, even if you’re only planning on walking the dog in them. Go half a size down as a general rule, unless you’ve got a wider foot.

 

 Paraboot

 Brannock size / Half a size down. 

 Paraboot run true to size, but what throws a lot of people off is the heel and instep on most of their styles running big. If you have a narrow foot or a low instep then going down half a size is the best option. Otherwise though, it’s best to size these based on comfort in the forefoot over anything else. A little bit of heel slip is normal, and will settle down and disappear with wear.

 

Yuketen

 

 True to Brannock size.

 Yuketen shoes run true to size as a starting point. The brand reference US made New Balance as a reference for sizing, which is pretty spot on. When sized properly the arch support and accommodating moccasin fit make these some of the most comfortable shoes to wear.

 However, a lot of the brand’s American made offerings can be sized differently if preferred. The unlined structure and use of softer leathers mean these shoes are some of the few that can benefit from sizing for stretch with wear. You can go snugger than usual with these (down half or a whole size) and the leather and insole will mould to your foot fairly quickly. This is not to say your shoes will become too big when buying your actual size. It’s a misconception that leather shoes which fit comfortably out of the box will stretch to be too big over time - they won’t. It’s all purely a matter of fit preference and Yuketen’s construction allows you to go either way. We’d say half a size down is the most you need to go for a more secure fit, but to each their own.

 

Wakouwa

  True to Brannock size.

 Wakouwa’s deck shoes are designed with ergonomic comfort in mind, and should be fitted in the heel and arch but with plenty of room in the toe. It throws a lot of people off at first and takes a bit of time to get used to, but once you do they’re incredibly comfortable. People often go down half or a whole size to get them to fit a bit more regular, which is fine with these. If you want to wear them as intended however, go true to size. It will feel weird at first but chances are you’ll love it once you’ve adjusted - full arch support, full freedom for your toes and no slippage in the heel.

 

White’s

 C461 Last 

 Half a size down.

 Pacific Northwest bootmaker White’s have a heritage of making some of the toughest all-leather work boots available, originally producing heavy duty footwear for loggers, linemen, and firefighters from the late 1800’s onwards. The boots have some of the most incredible arch support you’ll find - it feels like standing on a broomstick at first, but once broken in these things offer all day comfort in an extremely durable and weather resistant package. The Semi-Dress style we carry is built around the C461 last, and is reliably half a size down for a good fit, unless you have a wide foot. You should feel a secure fit around the heel, arch, and instep. The toe should feel comfortably round and roomy, with little to no pressure on any of your toes.

Pickup available at 78-80 Great Portland Street, Fitzrovia, W1W 7NT, London UK

Usually ready in 24 hours


The Rob Loafer from Yuketen is a new introduction for SS24 and forms part of Yuketen's Made in Italy Collection. Director Yuki Matsuda’s design concept with this collection is to take classic, well-loved American footwear styles and produce them in an artisanal, small historic Italian factory in Mount Sibillini. 

These Loafers are handcrafted using genuine Moccasin Construction, meaning the leather is wrapped from under the foot, completely enveloping the foot like a thick, super comfortable leather sock. The Rob is cut using original Yuketen patterns and hand-lasted using a last from the 1950’s, while the vamp and saddle areas feature unique hand-stitching details. The intricate overcast stiching on the saddle ensures that the seams are highly durable but also easy on the eye. Finished with classic penny loafer styling by adding a leather saddle across the plug with a hand-cut slot

Cut from a full grain, flesh-out Tosca leather tanned by Opera in Toscana, Italy. The tanning process for Tosca leather involves turning the leather inside out, which creates a unique texture and finish. The outer surface of the leather has a soft, suede-like texture, while the inside retains the smooth and durable grain side.

For further information on sizing and fitting please visit our footwear size guide or drop us an email on info@clutch-cafe.com.

  • Opera's full grain, flesh out Tosca leather 
  • Custom vegetable tanned leather insole with built in arch support
  • Stacked leather and rubber outsole
  • Hand cut, hand lasted & hand stitched
  • Genuine Moccasin construction
  • 1950's last
  • Listed in US sizing 
  • Yuketen E width 
  • Handmade in Italy